Light Sensor Module

RM18.00

& Free Shipping

A building-block light sensor (photoresistor) that reads how bright its surroundings are. It plugs in with an anti-reverse PH2.0 cable and works with micro:bit, Arduino UNO and Raspberry Pi Pico through their sensor expansion boards.

- +
Category:
IntelekEDU · Sensor module

Light Sensor Module

A photosensitive module that senses how bright its surroundings are. Students can use it to make lights that switch on in the dark, alarms that react to daylight and other smart projects. It comes in a blue and white building-block case that mounts straight onto brick models.

It connects with a fool-proof PH2.0 cable, with no breadboard or loose jumper wires. Through the matching expansion board, students can program it with micro:bit, Arduino UNO or Raspberry Pi Pico.

3.3 / 5 VWorking voltage
29.4 mmCompact module
3Controller platforms
3Lesson projects
Brick-compatible casePlug-in PH2.0 cableLuminous table lamp project with Arduino UNO, UNO expansion board, button module and light sensor module
How it works

A sensor that responds to light

The module uses a photoresistor, a component made from light-sensitive material such as cadmium sulphide. Light lowers its resistance. In bright light the resistance can drop to 1 kΩ or less, and in darkness it rises to around 1.5 MΩ.

The controller reads this change as a light level. Because it senses light without touching anything, it reacts quickly and works reliably.

Light sensor module pin layout (VCC, OUT, NC, GND) and specifications: 3.3V/5V, 29.4 x 28.8 mm
In the box

What you get

Light sensor module

Fitted in its building-block case.

PH2.0 cable

30 cm, anti-reverse plug.

Block bolts

For fixing the module onto brick models.

Packing box

Individual module box.

A controller board (micro:bit, Arduino UNO or Raspberry Pi Pico) and its sensor expansion board are not included.

Light sensor module with 30 cm PH2.0 cable and block bolts
Code it your way

Three platforms, ready-made lessons

Lesson guides with sample code cover three activities, “Read the light intensity”, “Emergency light” and “Smart vibrating alarm clock”, on each of the three platforms below.

micro:bit

MakeCode blocks

Graphical block programming on the micro:bit expansion board. A good start for younger learners.

Arduino UNO

Arduino IDE (C/C++)

Text programming on the UNO sensor expansion board, for students with some coding experience.

Raspberry Pi Pico

MicroPython

Python programming on the Pico / Pico 2 sensor expansion board.

Smart vibrating alarm clock project with Raspberry Pi Pico, Pico expansion board, light sensor, vibration motor and collision limit modules
Programming the sensor modules with Arduino C/C++, Raspberry Pi Pico MicroPython and micro:bit MakeCode
Connect

Pick the expansion board for your controller

Every module in our building-block sensor range plugs into one of three sensor expansion boards, each with PH2.0 ports.

UNO, micro:bit and Raspberry Pi Pico sensor expansion boards for the building-block sensor modules
Why our sensor modules

Built for the classroom

Building-block sensor modules connected with anti-reverse PH2.0 cables
Quick, safe wiring

Anti-reverse PH2.0 plugs only fit one way, so students can’t wire the module backwards.

Building-block sensor modules in blue and white ABS shells
Brick-compatible ABS case

A durable ABS shell with holes on the bottom and sides for fixing it onto building blocks.

Module details

Specifications

Sensor typePhotoresistor (light)
SignalAnalogue light reading
Working voltage3.3 V / 5 V
PinsVCC, OUT, NC, GND
Module size29.4 × 28.8 mm
ConnectionPH2.0 anti-reverse cable
Works withmicro:bit, Arduino UNO, Raspberry Pi Pico
MountingBuilding-block compatible case
NC pinNo connection needed
IntelekEDU

Build your module collection

Talk to us about classroom sets, expansion boards and quotations.

Reviews

There are no reviews yet.

Be the first to review “Light Sensor Module”

Your email address will not be published. Required fields are marked *

Shopping Cart
Light sensor module with 30 cm PH2.0 cable and block boltsLight Sensor Module
RM18.00
- +