Building Block Servo Motor
A grey servo shaped like a building brick that turns to an exact angle and holds it. It suits builds that need controlled positions, such as robotic arms, cranes and hanging towers.
It turns through 270°. Its white cross shaft fits standard LEGO cross holes, so students can fix arms, gears and beams straight onto it.

Choose the servo for angle control
The servo moves its output shaft to the angle your program sets, then holds it there. That makes it the right part for projects with fixed positions, such as robotic arms and cranes.
It uses the common 3-pin DuPont servo connector, so it works with many controller boards and is easy to add to bigger projects.
If your project needs to keep spinning, such as wheels, choose the Building Block DC Motor instead.

One output shaft, locked to an angle
This servo has one white cross output shaft. It suits projects that lock to a set angle.
A larger dual-shaft, 360° version is available on request. Ask us if you need that one.

Designed for hands-on classrooms
Overload protection
The gear set is made of three parts with a protective gear spring, which slips if the load goes past the maximum torque instead of stripping the gears.
Cross output shaft
Fits LEGO-standard cross holes for arms, gears and beams.
Quality parts
Hard-wearing servo wire, a high-precision potentiometer and a long-life motor. Works with single-board computers and many controller boards.


Program it with micro:bit
Drive the servo from a micro:bit through the Super:bit expansion board or the Basic:bit expansion board, using Microsoft MakeCode with the matching MakeCode extension. A lesson guide with sample code is available.
In the sample project, the servo steps through 0°, 90°, 180° and 270°, then back again, in a loop. It shows students how to set an angle from code.
Things that move to a position
Robotic arms, cranes, barriers, and steering on robot cars.
Not included
A micro:bit and expansion board are sold separately.

Specifications
Size and control signal
Size: 40 × 16 × 34.4 mm, the same body size as the Building Block DC Motor.
Pulse width to angle: 600 µs = −45°, 1500 µs = 90°, 2400 µs = 225°.

Bring your builds to life
Talk to us about classroom sets, controllers and quotations.







Reviews
There are no reviews yet.