Building Block DC Motor

RM30.00

& Free Shipping

A red building-block DC motor for projects that need continuous rotation, such as wheels and Ferris wheels. Fits LEGO-standard cross axles, runs on 3–5 V and connects with an anti-reverse XH2.54 plug.

- +
Category:
IntelekEDU · Building block motor

Building Block DC Motor

A red geared motor shaped like a building brick, made for anything that needs to keep turning: car wheels, a Ferris wheel, a spinning top. The controller sets both its speed and its direction.

The white cross shaft fits standard LEGO cross holes, so students can attach axles, gears and wheels straight from their brick sets.

360°Continuous rotation
70 rpmNo-load speed
3–5 VWorking voltage
11 gWeight
LEGO cross shaftAnti-reverse plugRed building block DC motor with white cross output shaft
Motor or servo?

Choose the motor for spinning projects

The DC motor rotates continuously in either direction, at a speed you control. That makes it the right part for moving builds such as small cars and tracked robots.

If your project needs to move to a set angle and hold it, such as a robotic arm or a crane, choose the Building Block Servo Motor instead.

Red building block DC motor for continuous rotation projects such as small cars
Connector

XH2.54 plug that only fits one way

The motor uses an XH2.54 connector. It is keyed, so it cannot be plugged in backwards, which saves time and avoids wiring mistakes in class.

Red building block DC motor with its anti-reverse XH2.54 connector
Built to last

Designed for hands-on classrooms

Overload protection

The gear set is made of three parts with a protective gear spring, which slips if the load goes past the maximum torque instead of stripping the gears.

Cross output shaft

Fits LEGO-standard cross holes for axles, gears and wheels.

Brick-shaped body

Pin holes on the case let it join building-block models directly.

Gear set with overload spring, cross output shaft compatible with LEGO cross holes, and durable servo wiring
Control it

Program it with micro:bit

Drive the motor from a micro:bit through the Super:bit expansion board, using Microsoft MakeCode with the Super:bit MakeCode extension. A lesson guide with sample code is available.

In the sample project, two motors on ports M1 and M2 run forwards, then each one reverses in turn, then both reverse, for 5 seconds at a time. It shows students how to control direction from code.

Build ideas

Things that spin

Ferris wheels, pirate ship rides, robot cars and buggies.

Controller

Not included

A micro:bit and Super:bit expansion board are sold separately.

Project ideas built with building block servos and motors: Ferris wheel, pirate ship, smart robot car and DIY robot car
Motor details

Specifications

ColourRed
Working voltage3–5 V
Rated voltage3 V
No-load speed70 ± 5 rpm
No-load current70 ± 20 mA
Stall torque0.5 ± 0.1 kg·cm
Stall current0.8 ± 0.1 A
Max torque500 g·cm
Output shaftSingle, LEGO cross
ConnectorXH2.54, anti-reverse
Weight11 g
Size40 × 16 × 34.4 mm

Same size as our servo

The DC motor and the Building Block Servo Motor share the same body size, so they can swap places in a build.

Dimension drawing of the red building block motor and grey building block servo, 40 x 16 x 34.4 mm
IntelekEDU

Bring your builds to life

Talk to us about classroom sets, controllers and quotations.

Reviews

There are no reviews yet.

Be the first to review “Building Block DC Motor”

Your email address will not be published. Required fields are marked *

Shopping Cart
Red building block DC motor with white cross output shaftBuilding Block DC Motor
RM30.00
- +